Thread: 4.40CFW Rogero v1.03 noob friendly Installation tutorial

Originally Posted by GSTAR01

Where do you see that message?
Did you perform the combo over network settings to check if the flag is set?
Did you rename the update and place in PS3/UPDATE?
Are you updating using recovery menu?
Did you perform the MD5 checks?

I saw that message when i was in a recovery mode also i check in the xmb afterwards but the same message showed.
Yes i perform the combo over network settings and checked the flag set.
Yes I renamed the update and placed in PS3/UPDATE. same i did before updating to OFW 3.55 and then to CFW 3.55
Yes I am updating using recovery menu. i have updated to OFW 3.55 and then to rogero CFW 3.55 v2 via recovery menu
Yes I have perfored the MD5 checks and all were matched.


please advise whats wrong? i have done everything according to your steps. i think i must go back to OFW 3.55 from rogero CFW 3.55 v3.7 (CURRENT) via recovery menu and then to rogero CFW 4.30 v2 via recovery menu. in short, 3.55 ofw to cfw 4.30 v2. but your advise would be great.

Thanks

i'm on 3.55 rebug. i will flash OFW 3.55 then rogero 3.55 3.7, but first i want to know, should i qa-flag while i'm on rebug 3.55 or on OFW 3.55 or on rogero 3.55?

Originally Posted by ansarz

I saw that message when i was in a recovery mode also i check in the xmb afterwards but the same message showed.
Yes i perform the combo over network settings and checked the flag set.
Yes I renamed the update and placed in PS3/UPDATE. same i did before updating to OFW 3.55 and then to CFW 3.55
Yes I am updating using recovery menu. i have updated to OFW 3.55 and then to rogero CFW 3.55 v2 via recovery menu
Yes I have perfored the MD5 checks and all were matched.


please advise whats wrong? i have done everything according to your steps. i think i must go back to OFW 3.55 from rogero CFW 3.55 v3.7 (CURRENT) via recovery menu and then to rogero CFW 4.30 v2 via recovery menu. in short, 3.55 ofw to cfw 4.30 v2. but your advise would be great.

Thanks

No, the correct method remains that you go from 3.55cfw v3.7 to 4.30cfw v2.00, in fact I've done it myself without any problems.
The not applicable error your gettings seem to be with the QA flag. I would suggest reinstalling the pkg and then running the program again untill you see edyviewer, install packages, debug settings.
Try it a few times and the update must be through recovery and you must be able to see Edyviewer etc... when using the combo to check.

Originally Posted by Arabology

i'm on 3.55 rebug. i will flash OFW 3.55 then rogero 3.55 3.7, but first i want to know, should i qa-flag while i'm on rebug 3.55 or on OFW 3.55 or on rogero 3.55?

Dehash (QA_toggle) first and then go to 3.55OFW. Make sure you check the 3.55OFW md5 (ca595ad9f3af8f1491d9c9b6921a8c61) and make sure you confirm whether flag is set by running combo.
Whilst on rebug, run the QA_toggle and confirm the flag is set by running the combo over network settings and being able to see Edyviewer, install packages, debug settings.
Then you can safely update to 3.55OFW using recovery menu.
You don't need to do anything on 3.55OFW, once your on 3.55OFW, follow the guide from the start.
On 3.55cfw rogero v3.7, you need to confirm whether or not the flag is still set by doing the combo stated earlier, if edyviewer etc... shows up after combo, then there is no need to re-run QA_toggle, but if it doesn't show up, then re-run QA_toggle and try combo again.

The point being that on both 3.55cfw rebug & 3.55cfw rogero, the flag must be set.

you're very good at this hope to see more from you here.

and thanks for correcting me, QA_Toggle ^^

thanks for this awsome tut. i have one problem, when i try backup any game to external hardrive it just stays on 0% and time just keeps going up.. have i done something wrong, is this happend to anyone else?? please help me out... cheers

If i replace all of the fixed eboots, param, sprx, self files etc with there originals will all of the games work fine or will i have to do anything to them?

Originally Posted by GSTAR01

No, the correct method remains that you go from 3.55cfw v3.7 to 4.30cfw v2.00, in fact I've done it myself without any problems.
The not applicable error your gettings seem to be with the QA flag. I would suggest reinstalling the pkg and then running the program again untill you see edyviewer, install packages, debug settings.
Try it a few times and the update must be through recovery and you must be able to see Edyviewer etc... when using the combo to check.

thanks you so much brother. you really did a great job here.! i am on 4.30cfw now and watching amazing spiderman blu ray

i want to know one more thing, how can i get to psn safely? do i have to get a software?

thanks again

Originally Posted by Arabology

you're very good at this hope to see more from you here.

and thanks for correcting me, QA_Toggle ^^

Thanks and your welcome

Originally Posted by eazyist

thanks for this awsome tut. i have one problem, when i try backup any game to external hardrive it just stays on 0% and time just keeps going up.. have i done something wrong, is this happend to anyone else?? please help me out... cheers

I don't use external but could you tell me how exactly your backing up your game?
Perhaps I can help.

Originally Posted by craze e 1

If i replace all of the fixed eboots, param, sprx, self files etc with there originals will all of the games work fine or will i have to do anything to them?

You should first try to run your fixed games as is.
Although the latest firmwares require the games to be clean, some fixed games will still work.
A moderator over at Tortuga-cove called Windrider stated that one should place the original eboot in the game and then update using MultiMan (ie triangle > update > install pkgs) or use aldostools game updater.
So I would recommend doing the first of what Windrider stated, place the original eboot & then update using Multiman.
I myself don't have any fixed games to try it with.

Originally Posted by ansarz

thanks you so much brother. you really did a great job here.! i am on 4.30cfw now and watching amazing spiderman blu ray

i want to know one more thing, how can i get to psn safely? do i have to get a software?

thanks again

Your welcome and congrats

As far as getting on PSN 'safely', well Sony can detect CFW and MultiMan.
Going online on CFW is not really safe but many do it anyways.
My advice is, don't auto-login.
When you start your PS3, you should not be signed in, you should first start MultiMan, then select game and start it, then from in game you should log into PSN.
Similarly if you wanted to change game, you should first log out, then boot up game and in game sign back into PSN.

You could try installing PSNnja v4 and selecting the first 3options, but you would need to disable clear history/logs in Multiman prior to that.
I myself do have PSNnja v4 as I wanted to test it, but it doesn't do exactly what we want it to do, offers no real protection.
It does seem to cause some problems with Raptr by not updating stats. Djfunky from PS3Hax that tested it with me told me he was experiencing problems with throphies not updating after installing PSNnja v4.
Up to you whether to install it or not, I do have it but I recognise it offers no real protection.

I do always do what I stated, in regards to signing in PSN once in game because our testing (djfunky & I), we found that it if one of us was logged into PSN and using MultiMan, our status would report us as MultiMan lol.

So you can go online as is, I have played on PSN without any problems, not often though because I'm usually playing Black Ops 2 on xbox 360.
Ah and I highly recommend you stay away from playing Black Ops 2 online on PS3, that will definetely ban you.
Many people have been banned playing Black Ops 2 on cfw.

To actually connect to PSN, you don't need anything, connect as you would normally connect (but from in game menu).