Thread: FactoryServiceMode Tool v0.1 - JIGless Service Mode

CrashSerious releases FactoryServiceMode Tool v0.1. With this application, Jailbroken PS3 Consoles no longer need the assistance of a JIG device in order to get into Factory/Service Mode. This means that one will be able to downgrade their consoles with ease, simply by running a PKG installed to their XMB. Again, this tool has been created using the open source PS1Light and 100% legal code.



Operation:Mongoose has a special message for Cobra/TB team:

"That cobra is .........!!! We roll deep .. do you Max?" -- Operation:Mongoose

+============================+

Look Ma, No Downgrade Dongle

+============================+

In keeping with our Red Valentines theme this month... we release another red themed app. Tonight, in our second release we bring you a second handy app that continues our commitment to the removal or the need for ANY dongles. A simple app that should likely make it into everyone's PS3 tool set. An XMB application that places the PS3 into factory service mode. Now, You can now throw away that downgrade dongle! Also, as an added bonus we've included CEX and DEX versions of the pkg.

Psgrade was ported to all sorts of devices, even calculators ... none of those external devices are needed any longer! You may now re-purpose them!

Usage:
------
When you run the app it will beep once and reboot if successful. Three beeps indicates a failure, report the contents of factory.txt in this thread for help. (Factory.txt will save to the USB flash if you put on in the right most USB port of the PS3.) At this point you will come back up in Factory Service Mode (FSM). Place the Lv2Diag.self on the USB the Lv2diag.self will perform its intended purpose automatically. So be aware of that feature should you not be expecting the PS3 to boot back into the non-FSM XMB.

This app will not work on any of the "reDRM" firmwares, aka Cobra or TrueBlue CFW.

• Install the appropriate pkg for your system; FactoryServiceMode.gnpdrm.pkg for CEX and FactoryServiceMode.pkg for DEX.
• Run the app and listen for the beeps, you should enter FSM automatically.
• Place the desired Lv2Diag.self files on the root of a USB flash drive, ensuring they are named Lv2diag.self. The one included with this release simply exits FSM. Do NOT use the RSOD Lv2Diag released earlier unless you have RSOD.
• Place the USB Flash Drive in the right most USB port of the PS3.
• Restart the PS3. When it boots up, you will be out of FSM.
• Enjoy sticking it to the dongle makers in your own little way.

Information:
------------
The app detects the firmware you are running on so it should work on all the firmwares supported by "one" previously. (3.15, 3.41, and 3.55. Basically, Ones that are lower than 3.56.) During creation of this tool, the open-source ps3toolchain, and a slightly modified make_self were utilized. All code is original and makes use of no previously released or copyrighted code, this Lv2diag.self is made 100% with the PSL1GHT SDK so it can be shared freely and without concern for breaking any laws in your country. So, "no sony code inside!"

FAQ:

Q: Can I use this with the RSOD fix self you released earlier?
A: You should only use the RSOD fix Lv2Diag.self to repair a RSOD PS3. Use the suplied Lv2diag.self packaged with this release to simply get out of service mode.

Q: I'm having problems... help!!!!?!?!?!?
A: Post the contents of the factory.txt, which is stored on the root of the USB flash drive where you put Lv2Diag.self, along with a detailed explanation and we will try to help you out. Without the contents of the factory.txt file... we will not be able to help.

Q: Why didn't you just name the release .self file Lv2diag.self and save us a step?
A: We intend to release more fun tools for you at some point, this just helps you keep them straight from the start.

Q: I get a 80010505 error in factory.txt on the USB drive sometimes. HELP!?!?!
A: We noticed this on one Phat CECHG system in testing. but could not replicate it on other PS3's and it only occured after the initial run from a power on of the PS3. In this case, every time we ran it a second time the application worked with out fail. Try again and post the factory.txt if the problem persists.

Q: Could you have made this just a little easier to use?
A: Nope! ;-)

Download: FactoryServiceMode.rar

Code:

 Source: http://psx-scene.com/forums/content/factoryservicemode-tool-v0-1-1922/

no one tested this yet? lol...

im probably gonna test this if no one do it when i come back from the job agency. considering how he say "Enjoy sticking it to the dongle makers in your own little way." hope they actually mean true blue too.

so now i dont need dongle to downgrade?from 4.00?

This will downgrade my PS3 that was originally on 3.55, right?

Originally Posted by bosko989

so now i dont need dongle to downgrade?from 4.00?

You never could.

hi i have ps3 fat
it is infect with rsod

Hello all
I have an infected ps3 fat with rsod
Tried to solve this problem by using Lv2diag.self with matrix dongel
It now run on green for 10 -30 s
then go to off no yello light green and red off
Does this solve the problem

but now i can?

Originally Posted by bosko989

but now i can?

Take a deep breath.... Ok. Enough oxygen now? Good. Answer me this.

HOW DID YOU PLAN ON INSTALLING A PKG ON 4.00? DID YOU EVEN READ THE **** POST?

Get an e3 flasher if you want to downgrade, this only works for 3.55<