If you havent fixed the No Play Burned game problem yet then either try adjusting the angle that your laser sits by turning the little black screw to the left of the eye just a little bit either way and see if that helps.. Or possibly your old and yep even the new eye dont have the gain on the DVD and or CD adjustments underneath the Laser its self set to the right strength.. It takes alot more effort for these lasers to read Copied media. They often die faster than an eye that hasn't been reading Copies its whole life.. If that doesnt work then check the "R", (or could be Z) wire on your chip, Make sure you run it along the outter edge of the motherboard. Its A timing wire and causes problems off all kinds if not ran right. Use a long wire for that connection...